
10.000 lümen sınıfı sabit montajlı projektör Müzeler, sergiler ve dijital görüntü uygulamaları için nefes kesici renkler ve son derece esnek projeksiyon sunar 2 lamba - Değiştirilebilir lens - Dynamic RGB Booster - Digital Link
- Yeni dinamik RGB güçlendirici ve canlı renk kontrolü sayesinde mükemmel görüntü kalitesi
- Lamba röle modlu Çift Lamba Sistemi 7 gün 24 saat çalışma sağlar
- Eko filtresi 10.000 saate kadar hava filtresi değiştirme çevrimi sağlar
- 10.000lm parlaklık
- XGA (1.080 x 768) çözünürlük
- 10.000:1 kontrast oranı (yüksek kontrast modundayken)
- Renk eşleme
- Dinamik RGB güçlendirici
- DIGITAL LINK
- 3B'ye hazır
Yeni lambasıyla, yenilikçi çift lamba sistemimiz 220-240V AC ile çalıştırmada 10.000lm parlaklık sağlarken gövdenin kompakt tutulmasına yardımcı olur. ‘Lamba Röle’ modundayken, sistem aynı zamanda lambalardan biri bozulduğunda kesintiler olmasını önler ve 7 gün 24 saat projeksiyon sağlar.
Panasonic’in dinamik RGB güçlendiricisi mükemmel renk üretimi ve parlaklığın yanında aynı zamanda yüksek görüntü kalitesi sunar. Benzer şekilde, Ayrıntı Netliği İşlemcisi 3 ayrıntılara daha fazla derinlik ve netlik getirir.
Projektörün Dinamik İris özelliğinde yüksek parlaklığını azaltmadan, çarpıcı bir 10.000:1 kontrast oranına ulaşmak için sahneyle bağlantılı açıklık mekanizması kullanılır. Bu mekanizma, daha derin ve zengin siyahlar elde edilmesine yardımcı olur ve daha detaylı dokulara sahip görüntüler sağlar.
Optik blok görüntü kalitesini koruyabilmek için toz girişini önler. Isı dağıtma bloğuna sahip yeni soğutma mekanizması cihazın aşınmasını ve yıpranmasını azaltır. 3.000 saate varan bir lamba değiştirme çevrimiyle, projektör daha düşük sahip olma ve bakım maliyetleri sağlar.
Gelişmiş sistem entegrasyonu için, DIGITAL LINK uyumluluğu HDMI, sıkıştırılmamış video, ses ve kontrol sinyallerinin tek bir LAN kablosu üzerinden aktarılmasını sağlar.
- Images
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no other services available.
Specifications
Power Supply | 120-240 V AC, 10-5.2 A, 50/60 Hz |
---|---|
Power Consumption (120-240V AC, 50/60Hz) | 1,030 W(1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL) |
DLP™ Chip Panel Size | 17.8 mm (0.7 in) diagonal (4:3 aspect ratio) |
DLP™ Chip Display Method | DLP™ chip x 1, DLP™ system |
DLP™ Chip Pixels | 786,432 (1,024 x 768) x 1, total of 786,432 pixels |
Lens PT-DX100K/DX100W | Powered zoom/focus lenses (1.8 - 2.5:1), F 1.7 - 1.9, f 25.6 - 35.7 mm |
Lens PT-DX100LK/DX100LW | Optional powered zoom/focus lenses and fixed-focus lens |
Lamp | 420 W UHM lamps (x 2) |
Screen Size | 1.27-15.24 m (50-600 inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055 (4:3 aspect ratio), 2.54-8.89 m (100-350 inches) with the ET-DLE030 (4:3 aspect ratio) |
Brightness | 10,000 lumens (dual lamp, LAMP MODE: NORMAL) |
Center-to-Corner Uniformity | 90% |
Contrast | 10,000:1 (full on/full off, in dynamic iris 3 mode) |
Resolution | 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) |
Scanning Frequency (HDMI/DVI-D) | fH: 15 - 100 kHz, fV: 24 - 120 Hz, dot clock: 25 - 162 MHz |
Scanning Frequency (RGB) | fH: 15 - 100 kHz, fV: 24 - 120 Hz, dot clock: 162 MHz or lower |
Scanning Frequency YPBPR (YCBCR) | 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz,525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz |
Scanning Frequency (Video/S-Video) | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PALM/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
Optical Axis Shift | Vertical: +50% (powered) (±45° with the ET-DLE085/ET-DLE105), Horizontal: ±10% (powered); NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed. |
Keystone Correction Range | Vertical ±40°; ±30° with the ET-DLE055/ET-DLE085/ET-DLE105. Cannot be used when the ET-DLE030 is installed. |
Installation | Ceiling/floor, front/rear |
Terminals HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only. |
Terminals DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only. |
Terminals RGB 1 In | BNC x 5 |
Terminals RGB 1 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
Terminals RGB 1 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
Terminals RGB 1 In S-Video Signal | Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
Terminals RGB 2 In | D-sub HD 15-pin (female) x 1 |
Terminals RGB 2 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
Terminals RGB 2 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
Terminals 3D Sync 1 In/Out | BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA |
Terminals 3D Sync 2 Out | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA |
Terminals Video In | BNC x 1, 1.0 Vp-p, 75 ohms |
Terminals Serial In | D-sub 9-pin (female)x 1 for external control (RS-232C compliant) |
Terminals Serial Out | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
Terminals Remoter 1 In | M3 jack x 1 for wired remote control |
Terminals Remoter 1 Out | M3 jack x 1 for link control |
Terminals Remoter 2 In | D-sub 9-pin (female)x 1 for external control (parallel) |
Terminals LAN/DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only. |
Power Cord Length | 3.0 m (9 ft 10 in) |
Cabinet Materials | Molded plastic |
Dimensions (W x H x D) PT-DX100K / DX100W | 498 x 200 x 556 mm (19-19/32 x 7-7/8 x 21-7/8 inches) (with supplied lens)" |
Dimensions (W x H x D) PT-DX100LK / DX100LW | 498 x 200 x 513 mm (19-19/32 x 7-7/8 x 20-3/16 inches) (without lens)" |
Weight PT-DX100K/DX100W | Approx. 18.3 kg (40.3 lbs) (with supplied lens) |
Weight PT-DX100LK/DX100LW | Approx. 17.6 kg (38.8 lbs) (without lens) |
Operation Noise | 40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO) |
Operating Temperature | 0℃ - 45 ℃ (32℉ - 113℉) |
Operating Humidity | 10% - 80% (no condensation) |
Technology | 1-Chip DLP |
Note | Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *5 With legs at shortest position. *6 Average value. May differ depending on models. *7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector. *8 Operation range differs depending on environments. |